Curioustab

Home » Civil Engineering » Structural Design Specifications

The area of the concrete in compression plus the area of reinforcement transferred on the basis of modular ratio, is called

transferred section
equivalent section
cracked section
none of these.

Correct Answer: cracked section

← Previous Question Next Question→

More Questions from Structural Design Specifications

The maximum compressive strength on 15 cm cubes of M 20 grade concrete at 7 days, should be a minimum of
The designed transverse shear in lacing is assumed as
The approximate value of torsion constant k for a box of depth d, width b, and having uniform thickness t, is
A continuous beam shall be deemed to be a deep beam if the ratio of its effective span to overall depth, is
Pick up the correct precaution while spilicing the reinforcing bars
For the plain reinforcing bars in compression, the permissible design bond stress in tension, is increased by
If the dimensions of a rectangular section of a short column are 15 cm x 20 cm, its unsupported length should be restricted to
For rolled I-beams and channels, permissible tensile and compressive stresses does not exceed
For the reinforced concrete member totally immersed in sea water, the normal cover provided for the reinforcing bars is further increased by
The test strength of the sample is taken as the average of the strength of

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion