Curioustab

Home » Civil Engineering » Structural Design Specifications

In adverse circumtances, the reinforced concrete member immersed in sea water or subjected to sea spray, the maximum permissible cover for the reinforcing bars, should not exceed

40 mm
50 mm
60 mm
70 mm
75 mm

Correct Answer: 75 mm

← Previous Question Next Question→

More Questions from Structural Design Specifications

Pick up the incorrect statement from the following:
The over all depth of a solid slab is 20 cm and effective depth is 15 cm. The horizontal distance between parallel main reinforcement should not be more than
The slenderness ratio of single angle discontinuous struts conmected by a single rivet or bolt, shall not exceed
If l is the effective span in metres and D is overall depth of the section in mm, the structure may be accepted after 24 hour load test, provided the maximum deflection in mm is less than
The reinforcing bars in beams are not bundled in contact if the diameter of the bars, exceeds
The ratio of minimum compressive strength on 15 cm cubes prepared with the concrete of M 20 grade and M 40 grade, at 7 days should be at least
Moist curing of the exposed surfaces of concrete is done at least for
In compression members, the lap length of a bar should not be less than
The grade of concrete generally not used in the reinforced concrete, is
The effective and actual lengths of a cantilever are same if continuous at the support,

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion