Curioustab

Home » Civil Engineering » Steel Structure Design

The equivalent axial load may be defined as the load which produces a stress equal to

maximum stress produced by the eccentric load
maximum stressed fibre
bending stress
none of these.

Correct Answer: maximum stress produced by the eccentric load

← Previous Question Next Question→

More Questions from Steel Structure Design

According to I.S. : 800 - 1871, lacing bars resist transverse shear equal to
Working shear stress on the gross area of a rivet as recommended by Indian Standards, is
For the economical design of a combined footing to support two equal column loads, the projections of beams in lower tier are kept such that bending moment under column is equal to
Maximum permissible slenderness ratio of compression members which carry dead and superimposed load, is
Water pressure in a 80 cm water main is 10 kg/cm2. The minimum thickness of the metal required for the water main, not to be stressed more than 200 kg/cm2, is
The main type of butt joints, is a double cover
In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the grossdiameter of the rivet is 26 mm, the number of rivets required in the splice, is
The channels get twisted symmetrically with regard to its axis
Outstanding length of a compression member consisting of a channel, is measured as
The ratio of hydrostatic stress to the volumetric strain within the elastic range, is called

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion