Curioustab

Home » Civil Engineering » Steel Structure Design

The diameter of a bolt hole is taken as the nominal diameter of the bolt plus

1.0 mm
1.2 mm
1.4 mm
1.6 mm
1.5 mm

Correct Answer: 1.6 mm

← Previous Question Next Question→

More Questions from Steel Structure Design

For a cantilever beam of length L built-in at the support and restrained against torsion at the free end, the effective projecting length l is
The deflection of beams may be decreased by
When plates are exposed to weather, tacking rivets are provided at a pitch in line not exceeding (where t is the thickness of the outside plate).
Stiffeners are used in a plate girder
Pick up the correct statement from the following:
Pick up the correct statement from the following:
In a tension member if one or more than one rivet holes are off the line, the failure of the member depends upon :
The stress in the wall of a thin cylinder subjected to internal pressure, is
The greatest permissible clear dimension of the web of thickness t in the panel of a plate girder, is restricted to
The stiff portion of a bearing stiffener is taken equal to

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion