Curioustab

Home » Civil Engineering » Steel Structure Design

According to the Unwin's formula, if t is thickness of the plate in mm, the nominal diameter of the rivet, is

d = 1.91 t
d = 1.91 t2
d = 1.91 t
d = 1.91 t
d = 2.3 t

Correct Answer: d = 1.91 t

← Previous Question Next Question→

More Questions from Steel Structure Design

If M is the moment due to a couple in a bearing plate whose width is b and allowable bending stress is P, the thickness (t) of the bending plate of the column splice, is
If L is the overall length of a combined footing having A as its area, d being the distance between the centre of gravity of the base and centre of the base, the larger width b is
If W and L are the total superimposed load and the span of a plate girder in metres, the approximate self weight (W) of the girder, is taken as
In case horizontal stiffeners are not used, the distance between vertical legs of flange angles at the top and bottom of a plate girder, is known as
A fillet weld whose axis is parallel to the direction of the applied load, is known as
Effective length of a column effectively held in position and restrained in direction at both ends, is
A riveted joint may experience
Perforated cover plates are particularly suitable for built up sections consisting of
The allowable stress in axial tension is generally kept less if thickness of the member is more than
Effective length of a column effectively held in position and restrained in direction at one end but neither held in position nor restrained in direction at the other end, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion