Curioustab

Home » Civil Engineering » RCC Structures Design

The Young's modulus of elasticity of steel, is

150 KN/mm2
200 KN/mm2
250 KN/mm2
275 KN/mm2

Correct Answer: 275 KN/mm2

← Previous Question Next Question→

More Questions from RCC Structures Design

The design of heel slab of a retaining wall, is based on the maximum bending moment due to:
On an absolutely rigid foundation base, the pressure will
If W is weight of a retaining wall and P is the horizontal earth pressure, the factor of safety against sliding, is
Total pressure on the vertical face of a retaining wall of height h per unit run exerted by the retained earth weighing w per unit volume, is
Side face reinforcement shall be provided in the beam when depth of the web in a beam exceeds
An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is
The weight of reinforced concrete, is generally taken as
An R.C.C. lintel is spanning an opening of 2 m span in a brick wall. The height of the roof is 2.9 m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be designed for self weight plus
As per IS : 456, the reinforcement in a column should not be less than
In a singly reinforced beam

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion