Curioustab

Home » Civil Engineering » RCC Structures Design

The ratio of the breadth to effective depth of a beam is kept

0.25
0.50
0.70
0.75
none of these.

Correct Answer: 0.50

← Previous Question Next Question→

More Questions from RCC Structures Design

If the width of the foundation for two equal columns is restricted, the shape of the footing generally adopted, is
If p1 and P2 are effective lateral loadings at the bottom and top exerted by a level earth subjected to a superload on the vertical face of height h of a retaining wall, the horizontal pressure p per unit length of the wall, is
The self-weight of the footing, is
By over-reinforcing a beam, the moment of resistance can be increased not more than
In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as
For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed
Columns may be made of plain concrete if their unsupported lengths do not exceed their least lateral dimension
The allowable tensile stress in mild steel stirrups, reinforced cement concrete, is
A pile weighing W1 kg penetrates S metres with its last blow. If W2 is the weight of the hammer having a drop of H metres, the pile can carry a maximum external load
Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion