Curioustab

Home » Civil Engineering » RCC Structures Design

A pile of length L carrying a uniformly distributed load W per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is

Correct Answer:

← Previous Question Next Question→

More Questions from RCC Structures Design

If p1 is the vertical intensity of pressure at a depth h on a block of earth weighing w per unit volume and the angle of repose φ, the lateral intensity of pressure p2 is
The maximum shear stress (qmax) in a rectangular beam is
If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than
A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be
The length of lap in tension reinforcement should not be less than the bar diameter x (actual tension / four times the permissible average bond stress) if it is more than
Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of
If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is
Distribution reinforcement in a simply supported slab, is provided to distribute
The live load to be considered for an inaccessible roof, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion