Curioustab

Home » Civil Engineering » RCC Structures Design

If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a

simply supported beam
continuous beam
cantilever beam
none of these.

Correct Answer: cantilever beam

← Previous Question Next Question→

More Questions from RCC Structures Design

According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than
A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be
The length of lap in tension reinforcement should not be less than the bar diameter x (actual tension / four times the permissible average bond stress) if it is more than
Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of
If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is
Distribution reinforcement in a simply supported slab, is provided to distribute
The live load to be considered for an inaccessible roof, is
Steel beam theory is used for
For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is
The horizontal portion of a step in a stairs case, is known as

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion