Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Civil Engineering
»
RCC Structures Design
The maximum shear stress (qmax) in a rectangular beam is
1.25 times the average
1.50 times the average
1.75 times the average
2.0 times the average
2.5 times the average.
Correct Answer:
1.50 times the average
← Previous Question
Next Question→
More Questions from
RCC Structures Design
If the ratio of the span to the overall depth does not exceed 10, the stiffness of the beam will ordinarily be satisfactory in case of a
According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than
A pile of length L carrying a uniformly distributed load W per metre length is suspended at the centre and from other two points 0.15 L from either end ; the maximum hogging moment will be
The length of lap in tension reinforcement should not be less than the bar diameter x (actual tension / four times the permissible average bond stress) if it is more than
Total pressure on the vertical face of a retaining wall of height h acts parallel to free surface and from the base at a distance of
If the maximum shear stress at the end of a simply supported R.C.C. beam of 16 m effective span is 10 kg/cm2, the length of the beam having nominal reinforcement, is
Distribution reinforcement in a simply supported slab, is provided to distribute
The live load to be considered for an inaccessible roof, is
Steel beam theory is used for
For stairs spanning l metres longitudinally between supports at the bottom and top of a flight carrying a load w per unit horizontal area, the maximum bending moment per metre width, is
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments