Curioustab

Home » Civil Engineering » RCC Structures Design

For normal cases, stiffness of a simply supported beam is satisfied if the ratio of its span to its overall depth does not exceed

10
15
20
25
30

Correct Answer: 20

← Previous Question Next Question→

More Questions from RCC Structures Design

Columns may be made of plain concrete if their unsupported lengths do not exceed their least lateral dimension
The allowable tensile stress in mild steel stirrups, reinforced cement concrete, is
A pile weighing W1 kg penetrates S metres with its last blow. If W2 is the weight of the hammer having a drop of H metres, the pile can carry a maximum external load
Long and short spans of a two way slab are ly and lx and load on the slab acting on strips parallel to lx and ly be wx and wy respectively. According to Rankine Grashoff theory
The minimum head room over a stair must be
An R.C.C. beam of 6 m span is 30 cm wide and has a lever arm of 55 cm. If it carries a U.D.L. of 12 t per m and allowable shear stress is 5 kg/cm2, the beam
The diameter of the column head support a flat slab, is generally kept
According to I.S.: 456, 1978 the thickness of reinforced concrete footing on piles at its edges, is kept less than
If W is the uniformly distributed load on a circular slab of radius R fixed at its ends, the maximum positive radial moment at its centre, is
If p is the net upward pressure on a square footing of side b for a square column of side a, the maximum bending moment is given by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion