Curioustab

Home » Civil Engineering » RCC Structures Design

An intermediate T-beam reinforced with two layers of tensile steel with clear cover 13 cm encasted with the floor of a hall 12 metres by 7 metres, is spaced at 3 metres from adjoining beams and if the width of the beam is 20 cm, the breadth of the flange is

300 cm
233 cm
176 cm
236 cm
255 cm

Correct Answer: 176 cm

← Previous Question Next Question→

More Questions from RCC Structures Design

The weight of reinforced concrete, is generally taken as
An R.C.C. lintel is spanning an opening of 2 m span in a brick wall. The height of the roof is 2.9 m above the floor level and that of the opening is 2.1 m above the floor level. The lintel is to be designed for self weight plus
As per IS : 456, the reinforcement in a column should not be less than
In a singly reinforced beam
If P kg/m2 is the upward pressure on the slab of a plain concrete footing whose projection on either side of the wall is a cm, the depth of foundation D is given by
If the length of a combined footing for two columns l metres apart is L and the projection on the left side of the exterior column is x, then the projection y on the right side of the exterior column, in order to have a uniformly distributed load, is (where x is the distance of centre of gravity of column loads).
If L is the effective span of a R.C.C. beam which is subjected to maximum shear qmax at the ends, the distance from either end over which stirrups for the shear, are provided, is
A column is regarded as long column if the ratio of its effective length and lateral dimension, exceeds
In a cantilever retaining wall without a heel slab
A ribbed slab is provided for

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion