Curioustab

Home » Civil Engineering » RCC Structures Design

If bending moment is M, shear force is F effecive depth is d, lever arm is la area of reinforcement is As and sum of the circumferences of main reinforcement is 0, the bond stress based on working stress method, is

Correct Answer:

← Previous Question Next Question→

More Questions from RCC Structures Design

A reinforced concrete cantilever beam is 3.6 m long, 25 cm wide and has its lever arm 40 cm. It carries a load of 1200 kg at its free end and vertical stirrups can carry 1800 kg. Assuming concrete to carry one-third of the diagonal tension and ignoring the weight of the beam, the number of shear stirrups required, is
A T-beam behaves as a rectangular beam of a width equal to its flange if its neutral axis
The radius of a bar bend to form a hook, should not be less than
The length of the straight portion of a bar beyond the end of the hook, should be at least
The thickness of the topping of a ribbed slab, varies between
With usual notations the depth of the neutral axis of a balanced section, is given by
In a singly reinforced beam, the effective depth is measured from its compression edge to
[A + (m - 1)ASC] known as equivalent concrete area of R.C.C. is given by
Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to
A simply supported beam , 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion