Curioustab

Home » Civil Engineering » RCC Structures Design

The length of the straight portion of a bar beyond the end of the hook, should be at least

twice the diameter
thrice the diameter
four times the diameter
five times the diameter
seven times the diameter.

Correct Answer: seven times the diameter.

← Previous Question Next Question→

More Questions from RCC Structures Design

The thickness of the topping of a ribbed slab, varies between
With usual notations the depth of the neutral axis of a balanced section, is given by
In a singly reinforced beam, the effective depth is measured from its compression edge to
[A + (m - 1)ASC] known as equivalent concrete area of R.C.C. is given by
Pick up the incorrect statement from the following. The intensity of horizontal shear stress at the elemental part of a beam section, is directly proportional to
A simply supported beam , 6 m long and of effective depth 50 cm, carries a uniformly distributed load 2400 kg/m including its self weight. If the lever arm factor is 0.85 and permissible tensile stress of steel is 1400 kg/cm2, the area of steel required, is
Pick up the true statement from the following:
If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is
If a rectangular prestressed beam of an effective span of 5 meters and carrying a total load 3840 kg/m, is designed by the load balancing method, the central dip of the parabolic tendon should be
If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion