Curioustab

Home » Civil Engineering » Hydraulics

If a1 and a2 are the cross-sectional areas of a tank and orifice, h the height of water level in tank above the centre of the orifice, the velocity of approach is given by

Correct Answer:

← Previous Question Next Question→

More Questions from Hydraulics

For a most economical rectangular channel, the width of the channel must be
The pressure rise due to water hammer depends upon
The centre of pressure of a vertical plane immersed in a liquid is at
In an inclined pipe, the pressure difference at its two ends is due to
The flow in open channel is laminar if the Reynold number is
The initial difference between liquid levels of two identical cylindrical vessels having their area of cross-section A, is H. Flow time T from one vessel to another through an orifice having coefficient of discharge Cd and area a will be
The ratio of the hydraulic radius of a pipe running full to the hydraulic radius of a square section of a channel whose side is equal to the diameter of the pipe, is
Most economical section of a circular channel for maximum velocity, is if,
If E1 and E2 are the specific energies at the start of back water curve and at the maximum rise of water respectively and ib and ie are the head slope and the energy line slope respectively, the length of back water (L) is given by
The ratio of the percentage error in the discharge and percentage error in the measurement of head, over rectangular notch, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion