Curioustab

Home » Civil Engineering » GATE Exam Questions

The dimensions for the flexural rigidity of a beam element in mass (M), length (L) and time (T) is given by

MT-2
ML3T-2
ML-1T-2
M-1T2

Correct Answer: M-1T2

← Previous Question Next Question→

More Questions from GATE Exam Questions

As per IS : 800-1984 the minimum pitch of rivets in a row is recommended as the diameter of the rivet times
An outlet irrigates an area of 20 ha. The discharge (l/s) required at this outlet to meet the evapotranspiration requirement of 20 mm occurring uniformly in 20 days neglecting other field losses is
Delta (Δ) in cm. Duty (D) in hectare Cumec and Base period (B) in days are related as
Well foundations are commonly used as foundations for the following structures :
The value of bearing capacity factor for cohesion, Nc, for piles as per Meyerhof, is taken as :
In using the data from a plate bearing test for determining the modulus of subgrade reaction, the value of settlement to be used is :
A cantilever beam of span 'L' is loaded with a concentrated load 'P' at the free end. Deflection of the beam at the free end is
The maximum tensile stress at the section X-X shown in the figure below is
Permissible bending tensile stress in high yield strength deformed bars of grade 415 N/mm2 in a beam is :
Cohesion in soil

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion