Curioustab

Home » Civil Engineering » Applied Mechanics

The beam shown in below figure is supported by a hinge at A and a roller at B. The reaction RA of the hinged support A of the beam, is

10.8 t
10.6 t
10.4 t
10.2 t.

Correct Answer: 10.2 t.

← Previous Question Next Question→

More Questions from Applied Mechanics

If a particle is projected inside a horizontal tunnel which is 554 cm high with a velocity of 60 m per sec, the angle of projection for maximum range, is
A particle moves along a straight line such that distance x traversed in t seconds is given by x = t2(t + 1), the acceleration of the particle, will be
u1 and u2 are the velocities of approach of two moving bodies in the same direction and their corresponding velocities of separation are v1 and v2. As per Newton's law of collision of elastic bodies, the coefficient of restitution (e) is given by
A uniform rod 9 m long weighing 40 kg is pivoted at a point 2 m from one end where a weight of 120 kg is suspended. The required force acting at the end in a direction perpendicular to rod to keep it equilibrium, at an inclination 60° with horizontal, is
The c.g. of a thin hollow cone of height h, above its base lies on the axis, at a height of
The product of mass and velocity of a moving a body, is called
If the radius of the earth is 600 km the height of a mountain above sea level at the top of which a beat seconds pendulum at sea level, looses 27 seconds a day, is
Maximum efficiency of a screw jack for the angle of friction φ, is
Pick up the correct statement from the following :
The C.G. of a right circular cone lies on its axis of symmetry at a height of

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion