Curioustab

Home » Chemical Engineering » Process Equipment and Plant Design

In the allocated cap area, bubble caps are generally arranged on equilateral triangular pitch. Number of caps fixed on a plate is with a

clearance of 25-75 mm.
cap pitch of 1.3-2 times the cap diameter.
either 'a' or 'b'.
neither 'a' nor 'b'.

Correct Answer: either 'a' or 'b'.

← Previous Question Next Question→

More Questions from Process Equipment and Plant Design

Heat transfer co-efficient for a horizontal condenser as compared to a vertical condenser operating under similar conditions is
Hoop (circumferential) stress induced in a thin walled 'Horton Sphere' used for the storage of liquid ammonia under pressure is
The wall thickness of thin cylindrical shell with hemispherical ends is __________ that of the spherical ends.
Normally, the length to diameter ratio of rotary dryers varies form 4 to 10 and for its economic operation, the number of transfer units (NTU) for such dryers varies from
Large process vessels operating under extreme temperature and pressure conditions are normally clad/ lined with materials like stainless steel, aluminium, nickel & its alloys, copper & its alloys and titanium. The cladding thickness is generally about __________ percent of the total thickness.
The LMTD correction factor (FT) is defined as the
The clearance between two tubes in a shell and tube heat exchanger is known as 'ligament', whose minimum value is __________ the outside diameter of the tube, but in no case it should be less than 4.5 mm.
Stage efficiency for packed tower varies with the
The raio, is normally taken as
The ratio of the largest load in a test to the original cross-sectional area of the test specimen is called the __________ stress.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion