More Questions from Volume and Surface Area

A water tank is 30 m long, 20 m wide and 12 m deep. It is made of iron sheet which is 3 m wide. The tank is open at the top. If the cost of the iron sheet is ₹ 10 per metre, then the total cost of the iron sheet required to build the tank is

Aptitude Volume and Surface Area Difficulty: Medium
Choose an option
  • A
    ₹ 6000
  • B
    ₹ 8000
  • C
    ₹ 9000
  • D
    ₹ 10000

Answer

Correct Answer: ₹ 6000

Explanation

### Concept & Surface Area of an Open Tank The total area of the iron sheet required is equal to the surface area of the tank excluding the top (as it is open). $$\text{Surface Area} = (l \times b) + 2(l \times h + b \times h)$$ $$\text{Length of Sheet} = \frac{\text{Surface Area}}{\text{Width of Sheet}}$$ ### Step-by-Step Solution * **Given:** Tank length ($l$) = $30 \text{ m}$, width ($b$) = $20 \text{ m}$, depth ($h$) = $12 \text{ m}$. Sheet width = $3 \text{ m}$, Cost = ₹ 10/m. * **Step 1: Calculate the surface area of the open tank** $\text{Base Area} = l \times b = 30 \times 20 = 600 \text{ m}^2$. $\text{Area of 4 walls} = 2h(l + b) = 2 \times 12(30 + 20) = 24 \times 50 = 1200 \text{ m}^2$. $\text{Total Area} = 600 + 1200 = 1800 \text{ m}^2$. * **Step 2: Find the required length of the iron sheet** $\text{Length} = \frac{\text{Total Area}}{\text{Width}} = \frac{1800}{3} = 600 \text{ m}$. * **Step 3: Calculate total cost** $\text{Total Cost} = \text{Length} \times \text{Rate} = 600 \times 10 = \text{₹ } 6000$. ### Exam Strategy & Shortcut Calculate the area directly as $600 (\text{base}) + 1200 (\text{walls}) = 1800$. Since cost is per linear meter of a 3m wide sheet, effectively the cost is $\frac{10}{3}$ rupees per square meter. $1800 \times \frac{10}{3} = 600 \times 10 = 6000$. ### Common Pitfall Calculating the total surface area of a closed cuboid instead of an open tank, which adds an extra $600 \text{ m}^2$ (the top lid), skewing the final cost. ### Final Answer Therefore, the correct answer is **₹ 6000**.
Discussion & Comments
No comments yet. Be the first to comment!
Join Discussion