Solve this multiple-choice question and choose the correct option.

Home » Mechanical Engineering » Strength of Materials

Torsion formula terminology: identify J/R in the torsion equation Using the torsion relation T/J = τ/R = Gθ/L for circular shafts. State the standard name of the quantity J/R. Choose the correct term.

Difficulty: Easy

Shear modulus
Section modulus
Polar modulus (polar section modulus)
None of these

Correct Answer: Polar modulus (polar section modulus)

Explanation:

Concept/FormulaFor circular shafts in torsion: T/J = τ/R = Gθ/L.Here, J is polar moment of inertia and R is outer radius. The ratio J/R is called the polar modulus (or polar section modulus), a geometric property indicating torsional strength.

Final AnswerPolar modulus (polar section modulus).

← Previous Question Next Question→

More Questions from Strength of Materials

Bearing stress control in dams: limiting base stress against permissible soil stress For a masonry/gravity dam, to prevent crushing of masonry at the base, compare the maximum base stress with the soil’s permissible compressive stress. Choose the correct relation.
Strain measurement devices: purpose of a strain rosette (commonly misspelled as resetter) A strain rosette comprises multiple gauges at known angles bonded at a point on a surface. Identify what it directly measures. Choose the correct option.
Thermal stress in an unconstrained bar: heating a free steel bar from 15°C to 40°C A steel bar is heated from 15°C to 40°C and is perfectly free to expand (no constraint). State the stress induced in the bar as a result of heating. Choose the correct option.
Strain energy in a solid circular shaft under torsion: expression in terms of τ and C A solid circular shaft is subjected to torsion; let τ denote maximum shear stress and C the shear modulus (modulus of rigidity). Express the total strain energy stored in the shaft in the form (factor) × Volume of shaft. Choose the correct factor.
Basic definition in mechanics of materials: deformation per unit length In axial loading, the ratio of change in length to the original length is termed as what? Choose the correct term.
Column buckling: direction of failure based on principal second moments of area A vertical column has two principal moments of inertia Ixx and Iyy about orthogonal centroidal axes. Identify the direction in which the column will tend to buckle first under axial compression. Choose the correct option.
Beam support classification: is “supported at both ends” a simply supported beam? A beam carried by a pin (hinge) at one end and a roller at the other is termed a simply supported beam. Evaluate the statement: “A beam supported at its both ends is not a simply supported beam.” Choose True or False.
Thin cylindrical shell under internal pressure: ratio of longitudinal strain to volumetric strain For a thin cylinder (diameter d, thickness t) under internal pressure p, with hoop and longitudinal stresses as in thin-shell theory, express (longitudinal strain)/(volumetric strain) in terms of Poisson’s ratio ν. Choose the correct formula.
Impact versus gradual loading: compare induced stresses in a linear elastic member A body (within elastic range) is loaded suddenly versus the same load applied gradually (static). How do the resulting stresses compare? Choose the correct relation.
Basic definition check: compressive stress and strain under axial shortening When a body is subjected to two equal and opposite pushes and tends to shorten in length, the nature of the stress and strain induced is compressive. State whether this statement is correct.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion