Curioustab

Home » Technical Drawing » Multiview Drawing

In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________.

leave the view as is
eliminate the view
use the left view instead
none of the above

Correct Answer: eliminate the view

Next Question→

More Questions from Multiview Drawing

The type of line that projects from an object for the express purpose of locating a dimension is a ________ line.
In developing a multi-view drawing the drafter can use a ________ line to help locate the top and right side views.
A full scale technical drawing will have a scale factor of ________.
Center lines are used to locate or represent the centers of ________.
If a designer is developing a plan for a project in which the entire part is made out of ¾" thick plywood and he only wants to use one view, he should use the ________ view.
Geometric primitives include shapes such as ________.
Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures ________.
The AutoCAD command used to combine two or more primitive shapes into a single complex 3-dimensional model is ________.
Architectural drawings used to construct a house are often plotted with a scale of ¼" = 1'-0". What scale is this?
If technical drawings are used to communicate size and shape descriptions, it is not important to worry about either the weight of a line or the type of line being used.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion