Curioustab

Home » Technical Drawing » Multiview Drawing

If a designer is developing a plan for a project in which the entire part is made out of ¾" thick plywood and he only wants to use one view, he should use the ________ view.

front
top
right
back

Correct Answer: front

← Previous Question Next Question→

More Questions from Multiview Drawing

Geometric primitives include shapes such as ________.
Most architectural drawings produced for field use by building contractors are printed on architectural "D" size paper which measures ________.
The AutoCAD command used to combine two or more primitive shapes into a single complex 3-dimensional model is ________.
Architectural drawings used to construct a house are often plotted with a scale of ¼" = 1'-0". What scale is this?
If technical drawings are used to communicate size and shape descriptions, it is not important to worry about either the weight of a line or the type of line being used.
Short dashed lines can be used to illustrate a visible feature.
The ASME Y14.2M line thickness standard for visible lines is .8mm thick.
A visible line represents the continuous edge of an object being illustrated.
A three dimensional object can be constructed with only the height and width dimensions given.
The projection of geometric information such as lines, points, and planes is usually referred to as orthographic projection.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion