Dimension text is generally placed above the ________ line.

More Questions from Dimensioning Architectural Drawings

• There should be a visible gap between the wall and the ________ line.
• Text and dimensions are aligned on the drawing so they can be easily read from the bottom and right side of the sheet.
• The dimensioning standards used by a typical architectural firm were probably developed by the architects, designers, and drafters in the firm.
• Architectural drafters are usually expected to place dimensions to the CAD standards established by the firm.
• The total dimension of the front side should match the total dimension of the back side.
• Dimensioning to the edges of doors and windows is the preferred method by most architectural drafters.
• Drafters usually begin a set of dimensions from the inside edge of an exterior wall.
• Architectural dimensioning usually relies on tick marks or dots rather than arrow points.
• Minor errors in dimensioning on an architectural drawing can result in major construction problems on the job site.
• Tolerances in an architectural drawing are just as close as tolerances used in mechanical drawings.

Discussion & Comments