Curioustab

Home » Technical Drawing » Computer Aided Design Basics

A line with a tapering width can be easily created by using the ________ tool.

circle
eclipse
line
polyline

Correct Answer: polyline

Next Question→

More Questions from Computer Aided Design Basics

If you use the absolute coordinate system to create a line from a starting point of 0, 0 8 units on the X axis and 5 units on the Y axis you enter ________ for the second point.
Understanding the Cartesian coordinate system will help the beginning drafter ________.
In order to set drawing limits for a "C" size architectural drawing the drafter should set the limits to ________.
When drawing a line using the relative coordinate system a line is created from ________.
When setting up a mechanical drawing in AutoCAD the drafter should set the units to ________.
The UCS icon represents the intersection of the ________.
Using the Relative Polar Coordinate System to add a 3 inch line that is 45 degrees from the end point of the line created above the drafter would ________.
When using the direct entry method to create a horizontal line exactly three inches long the drafter should ________ first.
One quick way to view the entire drawing area is to use the Zoom command by typing ________.
You cannot use the Offset Tool to enlarge the size of a circle.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion