Production Engineering problems
- 1. A process of removing metal by pushing or pulling a cutting tool is called
Options- A. up milling
- B. down milling
- C. forming
- D. broaching Discuss
Correct Answer: broaching
- 2. In metal machining, the work-tool contact zone is a zone where heat is generated due to
Options- A. plastic deformation of metal
- B. burnishing friction
- C. friction between the moving chip and the tool face
- D. none of the above Discuss
Correct Answer: burnishing friction
- 3. In grinding irregular, curved, tapered, convex and concave surfaces, the grinder used is
Options- A. cylindrical grinder
- B. internal grinder
- C. surface grinder
- D. tool and cutter grinder Discuss
Correct Answer: surface grinder
- 4. Carbon tool steels have low-heat and wear-resistance.
Options- A. Correct
- B. Incorrect Discuss
Correct Answer: Correct
- 5. The lathe spindles are usually made hollow and provided with
Options- A. internal taper
- B. external taper
- C. internal and external taper
- D. no taper Discuss
Correct Answer: internal taper
- 6. The angle between the shear plane and __________ is called shear angle.
Options- A. work surface
- B. tool face Discuss
Correct Answer: work surface
- 7. In order to grind soft material
Options- A. coarse grained grinding wheel is used
- B. fine grained grinding wheel is used
- C. medium grained grinding wheel is used
- D. any one of these Discuss
Correct Answer: coarse grained grinding wheel is used
- 8. The binding material used in cemented carbide tools is
Options- A. tungsten
- B. chromium
- C. silicon
- D. cobalt Discuss
Correct Answer: cobalt
- 9. A __________ grinding wheel is used to grind soft materials.
Options- A. coarse grained
- B. medium grained
- C. finegrained Discuss
Correct Answer: coarse grained
- 10. Trepanning is an operation of
Options- A. making a cone-shaped enlargement of the end of a hole
- B. smoothing and squaring the surface around a hole
- C. sizing and finishing a small diameter hole
- D. producing a hole by removing metal along the circumference of a hollow cutting tool Discuss
Correct Answer: producing a hole by removing metal along the circumference of a hollow cutting tool
More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.