Production Engineering problems
- 1. The height of each tooth of a broach is
Options- A. same throughout
- B. in progressively decreasing order
- C. in progressively increasing order
- D. none of these Discuss
Correct Answer: in progressively increasing order
- 2. High speed steel tools retain their hardness upto a temperature of
Options- A. 250°C
- B. 350°C
- C. 500°C
- D. 900°C Discuss
Correct Answer: 900°C
- 3. In hot machining, solid carbide tools are preferred over high speed steel tools.
Options- A. True
- B. False Discuss
Correct Answer: True
- 4. The abrasive slurry used in ultra-sonic machining contains fine particles of
Options- A. aluminium oxide
- B. boron carbide
- C. silicon carbide
- D. any one of these Discuss
Correct Answer: any one of these
- 5. The chuck used for setting up of heavy and irregular shaped work should be
Options- A. four jaw independent chuck
- B. three jaw universal chuck
- C. magnetic chuck
- D. drill chuck Discuss
Correct Answer: four jaw independent chuck
- 6. The surface finish is improved by the increase in
Options- A. cutting speed
- B. nose radius
- C. true rake angle
- D. all of these Discuss
Correct Answer: all of these
- 7. A coarse grained grinding wheel is used to grind
Options- A. hard and brittle materials
- B. soft and ductile materials
- C. hard and ductile materials
- D. soft and brittle materials Discuss
Correct Answer: soft and ductile materials
- 8. Ceramic tools are fixed to tool body by
Options- A. soldering
- B. brazing
- C. welding
- D. clamping Discuss
Correct Answer: brazing
- 9. Carbide tipped tools usually have
Options- A. negative rake angle
- B. positive rake angle
- C. any rake angle
- D. no rake angle Discuss
Correct Answer: negative rake angle
- 10. The factor which affects the tool life is
Options- A. tool geometry
- B. cutting speed
- C. feed rate
- D. all of these Discuss
Correct Answer: all of these
More in Mechanical Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.