Programmable Logic Device problems
- 1. FLEX10K devices are generally classified as ________.
Options- A. PLDs
- B. FPGAs
- C. HCPLDs
- D. CPLDs Discuss
Correct Answer: FPGAs
- 2. A macrocell is ________.
Options- A. part of a PAL or GAL
- B. a type of one-time programmable SPLD
- C. an example of intellectual property
- D. a logic array block Discuss
Correct Answer: part of a PAL or GAL
- 3. In the MAX7000S device up to ________ signals can feed each LAB from the PIA.
Options- A. 0
- B. 18
- C. 36
- D. 72 Discuss
Correct Answer: 36
- 4. A GAL22V10 ________.
Options- A. has up to 32 inputs and 10 outputs
- B. is a type of SPLD
- C. has 10 inputs and 22 outputs
- D. is downloadable from the manufacturer's Web site Discuss
Correct Answer: is a type of SPLD
- 5. A method for the automated testing of printed circuit boards is called a(n) ________.
Options- A. bed-of-nails
- B. LUT
- C. CLB
- D. CPLD Discuss
Correct Answer: bed-of-nails
- 6. In a programmable logic device circuit diagram, the inputs to each of the OR gates are designated by ________.
Options- A. a dot
- B. a bus
- C. a single line
- D. 4 inputs Discuss
Correct Answer: a single line
- 7. In the GAL16V8, the ________ controls the tristate buffer's enable input.
Options- A. FMUX
- B. OMUX
- C. PTMUX
- D. TMUX Discuss
Correct Answer: TMUX
- 8. In a FLEX10K device, the carry chain provides a fast carry forward function between ________.
Options- A. LUTs
- B. EABs
- C. LEs
- D. LABs Discuss
Correct Answer: LEs
- 9. All inputs to the MAX7000S device and all macrocell outputs feed the ________.
Options- A. LUT
- B. PIA
- C. LAB
- D. PIA and LAB Discuss
Correct Answer: PIA
- 10. The final step in a design flow in which the logic design is implemented in the target device is called ________.
Options- A. design entry
- B. simulation
- C. downloading
- D. compiling Discuss
Correct Answer: downloading
More in Digital Electronics:
Programming
Copyright ©CuriousTab. All rights reserved.