logo

CuriousTab

CuriousTab

Building Construction problems


  • 1. In the method of tube boring of soil investigation, the following is essential :

  • Options
  • A. a tube of about 2 metres length and 20 cm diameter with a cutting edge
  • B. a flap valve at the bottom of tube is provided to extract the soil sample
  • C. the tube is raised and lowered by 4 thick rope moving over a pulley suspended on a tripod stand
  • D. the tube is dropped to fall under gravity in side a metalic casing pipe which is driven as the depth of excavation proceeds.
  • E. all the above.
  • Discuss
  • 2. Safe bearing capacity of black cotton soil varies from

  • Options
  • A. 2 to 3 t/m2
  • B. 5 to 7.5 t/m2
  • C. 8 to 10 t/m2
  • D. 10 to 12 t/m2.
  • Discuss
  • 3. To stagger vertical joints in successive courses of a wall, a piece of brick is generally used at the end of the course, which is known as

  • Options
  • A. bat
  • B. header
  • C. stretcher
  • D. closer.
  • Discuss
  • 4. Pile foundations are suitable for

  • Options
  • A. water logged soils
  • B. soft rocks
  • C. compact soils
  • D. multistoreyed buildings
  • E. none of these.
  • Discuss
  • 5. Pick up the consideration to the taken while designing a hospital from the following :

  • Options
  • A. the operation theatre unit to be detached as it requires sterlized zone but near the ward for the patients and doctor
  • B. the mortuary should be detached from the main circulation with a postmortem room
  • C. causalty unit should be provided a separate entrance
  • D. all the above.
  • Discuss
  • 6. The nominal thickness of one brick wall in mm, is

  • Options
  • A. 90 mm
  • B. 150 mm
  • C. 190 mm
  • D. 200 mm.
  • Discuss
  • 7. According to National Building Code, the hydrants in water mains is provided at minimum interval of

  • Options
  • A. 50 m
  • B. 60 m
  • C. 75 m
  • D. 90 m.
  • Discuss
  • 8. In verandah floors outward slope is

  • Options
  • A. 1 in 40
  • B. 1 in 50
  • C. 1 in 60
  • D. 1 in 70
  • E. 1 in 100.
  • Discuss
  • 9. The projections of head or sill of a door or window frame, are

  • Options
  • A. transoms
  • B. horns
  • C. stops
  • D. chocks.
  • Discuss
  • 10. Rotary drilling is the fastest method in case of

  • Options
  • A. rocky soils
  • B. clay soils
  • C. sandy soil
  • D. all of these.
  • Discuss

First 16 17 18 ... 20 .. 22 23 Last