Curioustab

Home » Mechanical Engineering » Strength of Materials

The strain energy stored in a hollow circular shaft of outer diameter (D) and inner diameter (d) subjected to shear stress is

x Volume of shaft
x Volume of shaft
x Volume of shaft
x Volume of shaft

Correct Answer: x Volume of shaft

← Previous Question Next Question→

More Questions from Strength of Materials

In spring balances, the spring is used
The compressive strength of brittle materials is __________ its tensile strength.
When a body is subjected to a direct tensile stress (σx) in one plane accompanied by a simple shear stress (τxy ), the minimum normal stress is
Two solid shafts 'A' and 'B' are made of the same material. The shaft 'A' is of 50 mm diameter and shaft 'B' is of 100 mm diameter. The strength of shaft 'B' is __________ as that of shaft A.
When the retained material is subjected to some superimposed or surcharged load, the total horizontal pressure due to surcharged load is (where p = Intensity of the supercharged load)
The tensile test is carried on __________ materials.
The longitudinal stress in a riveted cylindrical shell of diameter (d), thickness (t) and subjected to an internal pressure (p) is
In calculating the strength of a riveted joint in tearing, shearing and crushing, the
The pull required to shear off a rivet, in double shear, per pitch length is
The ductility of the material __________ with the decrease in percentage elongation of a specimen under tensile test.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion