Curioustab

Home » Mechanical Engineering » Steam Boilers and Engines

In a compound steam engine, the temperature range per cylinder is reduced, with corresponding reduction in the condensation.

Correct
Incorrect

Correct Answer: Correct

← Previous Question Next Question→

More Questions from Steam Boilers and Engines

When the expansion of steam is carried out in a single cylinder and then exhausted into the atmosphere or a condenser, the engine is said to be a simple steam engine.
The function of a superheater is to heat the feed water by utilising the heat in the exhaust flue gases before leaving through the chimney.
The high steam and low water safety valve is used to blow off steam when the
Willian's law holds good for throttle-governed engine, but not for cut-off governed engine.
Willian's line follows the law (where b = A constant representing the shape of the Willian's line, a = Another constant i.e. no load consumption per hour, I.P. = Indicated power, and m = Steam consumption per hour)
The water tube boilers produce steam at a __________ pressure than that of fire tube boilers.
For the same diameter and thickness of tube, a water tube boiler has __________ heating surface as compared to fire tube boiler.
The missing quantity is mainly due to cylinder condensation and a small amount of steam leakage past the valves and piston.
A single ended Scotch marine steam boiler may have one to four furnaces which enter from front end of the boiler.
The function of a D-slide valve is to exhaust steam from the cylinder at proper moment.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion