Curioustab
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Aptitude
General Knowledge
Verbal Reasoning
Computer Science
Interview
Home
»
Mechanical Engineering
»
Machine Design
In radial cams, the follower moves
in a direction perpendicular to the cam axis
in a direction parallel to the cam axis
in any direction irrespective of cam axis
along the cam axis
Correct Answer:
in a direction perpendicular to the cam axis
Next Question→
More Questions from
Machine Design
When screw threads are to be used in a situation where power is being transmitted in one direction only, then the screw threads suitable for this will be
When a bolt is subjected to shock loading, the resilience of the bolt should be considered in order to prevent breakage at the
In unilateral system of tolerance, the tolerance is allowed on
In a hydrodynamic lubricated bearing
Stress concentration is caused due to
In second type of levers,
In order to avoid tearing of the plate at an edge, the distance from the centre line of the rivet hole to the nearest edge of the plate should be equal to (where d = Diameter of rivet hole)
A plate with an elliptical hole in the centre, with semi-major axis (a) perpendicular to the direction of loading and semi-minor axis (b) along the direction of loading, is subjected to a pull P. The maximum stress induced at the edge of the hole is equal to (where σ = Stress for a plate with no hole i.e. nominal stress)
The velocity of sliding __________ the distance of the point of contact from the pitch point.
The square threads are not so strong as V-threads but they offer less frictional resistance to motion than Whitworth threads.
Discussion & Comments
No comments yet. Be the first to comment!
Name:
Comment:
Post Comment
Join Discussion
Discussion & Comments