Solve this multiple-choice question and choose the correct option.

Home » Mechanical Engineering » Machine Design

Levers: identify the second-class lever configuration (Type II) Recall the relative positions of fulcrum, load, and effort in a second-class lever. Choose the correct option.

Difficulty: Easy

Load is between fulcrum and effort
Effort is between fulcrum and load
Fulcrum is between load and effort
None of these

Correct Answer: Load is between fulcrum and effort

Explanation:

ConceptIn a second-class lever (Type II), the load lies between the fulcrum and the effort (examples: wheelbarrow, nutcracker). First-class has the fulcrum between load and effort; third-class has the effort between fulcrum and load.

Final AnswerLoad is between fulcrum and effort

← Previous Question Next Question→

More Questions from Machine Design

Riveted joints: minimum edge distance to avoid tearing of the plate Given d = diameter of the rivet hole. Select the minimum required distance from the rivet-hole centreline to the nearest plate edge to prevent edge tearing. Choose the correct value.
Stress concentration around an elliptical hole in a plate under tension Plate with a central elliptical hole: semi-major axis a is perpendicular to loading; semi-minor axis b is along the loading direction. Let σ be the nominal (no-hole) stress. Find the maximum stress at the hole edge.
Involute gears: dependence of sliding velocity on contact position Consider a point of contact on the line of action at a distance from the pitch point. State how the sliding velocity varies with the distance from the pitch point.
Power screw thread forms: friction and strength comparison Assess the statement: Square threads are not as strong as V-threads, but they offer less frictional resistance than Whitworth threads. Decide whether the statement is correct.
Pipe joints for low-pressure water service Identify the joint most commonly used for pipes carrying water at low pressure. Choose the correct option.
Column classification by slenderness ratio Select the threshold slenderness ratio at or above which a column is classified as a long column (Euler-type behavior dominates). Choose the correct value.
Fatigue performance measure of materials Identify the standard property used to indicate resistance to fatigue failure under cyclic loading. Choose the correct option.
Stress concentration factor (K_t): dependence on part characteristics Determine what K_t primarily depends on for an elastic member with a notch/hole/fillet. Choose the correct option.
Riveted boiler joints: thickness of unequal double-cover butt straps For unequal-width double-cover butt straps on a plate of thickness t: Identify the standard strap thicknesses (inside wide strap vs. outside narrow strap). Choose the correct option.
IBR boiler riveting: shearing resistance per pitch length in double shear Let d = rivet diameter, τ = allowable shear stress, and n = number of rivets per pitch length. According to I.B.R., determine the shearing resistance required to shear off the rivets (double shear). Choose the correct expression.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion