Home » Mechanical Engineering » Compressors, Gas Dynamics and Gas Turbines

Peak combustion pressure comparison: gas turbines vs. I.C. engines. Complete the statement: The maximum combustion pressure in a gas turbine is __________ as compared to that in an internal-combustion (reciprocating) engine. Choose the most accurate relation.

Difficulty: Easy

much lower than that in an I.C. engine
approximately the same as that in an I.C. engine
much higher than that in an I.C. engine
independent of cycle/engine type

Correct Answer: much lower than that in an I.C. engine

Explanation:

← Previous Question Next Question→

More Questions from Compressors, Gas Dynamics and Gas Turbines

Jet engines: operating condition for higher propulsive efficiency. Determine at which operating regime a jet engine attains higher propulsive efficiency relative to low-speed operation. Select the best option.
Open-cycle vs. closed-cycle gas turbines: cycle identity. Statement to evaluate: An open-cycle gas turbine works on the same thermodynamic cycle as a closed-cycle gas turbine (working-fluid handling differs, but the ideal cycle is identical). Choose whether you agree with the statement.
Maximum turbine inlet temperature in gas turbines: select the closest typical value. Choose the approximate maximum temperature level used in gas-turbine practice (turbine inlet temperature, TIT).
Jet propulsion: identify the correct thrust mechanism. Choose the statement that correctly describes how thrust is produced in jet propulsion systems.
Aftercoolers in compressed-air systems: primary purpose. Identify what an aftercooler accomplishes downstream of compression to prepare air for distribution/use.
Closed-cycle gas turbine vs open-cycle gas turbine: compare thermal efficiency Consider an idealized comparison where overall pressure ratio and turbine inlet temperature limits are similar. Choose how the thermal efficiency of a closed-cycle gas turbine typically compares with that of an open-cycle gas turbine.
Two-stage reciprocating compressor with perfect intercooling: find the optimum intermediate pressure Compression from p₁ to p₃ is performed in two stages with perfect intercooling and negligible pressure losses. What is the optimum intermediate pressure p₂ that minimizes work for equal polytropic law in both cylinders? Choose the correct formula.
Compressor efficiencies: identify the ratio IP/BP For a compressor driven by a prime mover, consider the ratio of indicated power (IP) to the shaft/brake power (BP) supplied to the compressor. What is this efficiency called? Choose the correct term.
Two-stage reciprocating air compressor: work per cycle composition Consider a two-stage reciprocating air compressor. The total work done per cycle equals what combination of stage works? Choose the correct statement.
Compressor capacity at standard conditions (FAD concept) Statement: The actual volume of air delivered by a compressor, reduced to normal (standard) temperature and pressure conditions, is called the compressor capacity. Decide whether the statement is correct.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion