Solve this multiple-choice question and choose the correct option.

Home » Mechanical Engineering » Compressors, Gas Dynamics and Gas Turbines

Maximum turbine inlet temperature in gas turbines: select the closest typical value. Choose the approximate maximum temperature level used in gas-turbine practice (turbine inlet temperature, TIT).

Difficulty: Easy

200°C
500°C
700°C
1000°C

Correct Answer: 1000°C

Explanation:

Concept/ApproachClassical gas-turbine practice cites turbine inlet temperatures on the order of about 1000°C (and higher in modern engines with advanced cooling/materials). The lower listed values are far below practical TIT for efficient operation.

Final Answer1000°C.

← Previous Question Next Question→

More Questions from Compressors, Gas Dynamics and Gas Turbines

Jet propulsion: identify the correct thrust mechanism. Choose the statement that correctly describes how thrust is produced in jet propulsion systems.
Aftercoolers in compressed-air systems: primary purpose. Identify what an aftercooler accomplishes downstream of compression to prepare air for distribution/use.
Closed-cycle gas turbine vs open-cycle gas turbine: compare thermal efficiency Consider an idealized comparison where overall pressure ratio and turbine inlet temperature limits are similar. Choose how the thermal efficiency of a closed-cycle gas turbine typically compares with that of an open-cycle gas turbine.
Two-stage reciprocating compressor with perfect intercooling: find the optimum intermediate pressure Compression from p₁ to p₃ is performed in two stages with perfect intercooling and negligible pressure losses. What is the optimum intermediate pressure p₂ that minimizes work for equal polytropic law in both cylinders? Choose the correct formula.
Compressor efficiencies: identify the ratio IP/BP For a compressor driven by a prime mover, consider the ratio of indicated power (IP) to the shaft/brake power (BP) supplied to the compressor. What is this efficiency called? Choose the correct term.
Two-stage reciprocating air compressor: work per cycle composition Consider a two-stage reciprocating air compressor. The total work done per cycle equals what combination of stage works? Choose the correct statement.
Compressor capacity at standard conditions (FAD concept) Statement: The actual volume of air delivered by a compressor, reduced to normal (standard) temperature and pressure conditions, is called the compressor capacity. Decide whether the statement is correct.
Application range of rotary compressors: flow rate and pressure level Rotary (positive-displacement or dynamic) compressors are typically selected to deliver which combination of flow and pressure? Choose the best description.
Compressor type used in gas turbines: identify the rotary compressor Gas turbines (especially aircraft and large power units) primarily use which type of rotary compressor? Choose the correct option.
How compressor capacity is expressed: choose the standard unit Compressor capacity is normally stated as a volumetric flow rate at standard (or specified) conditions. Select the correct unit.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion