MAX7000S device blocks: The family uses Logic Array Blocks (LABs) and a Programmable Interconnect Array (PIA), not “intermediate.” Decide whether the term “programmable intermediate array” is correct for MAX7000S.

Difficulty: Easy

Correct Answer: Incorrect

Explanation:


Introduction / Context:
Vendor-specific block names matter when reading handbooks and constraint guides. The MAX7000S CPLD family features macrocells organized in LABs connected by a routing fabric formally called the Programmable Interconnect Array (PIA).



Given Data / Assumptions:

  • MAX7000S uses LABs for logic macrocells.
  • The routing matrix is termed “Programmable Interconnect Array.”
  • The phrasing “programmable intermediate array” is not the standard name.


Concept / Approach:
Precision in nomenclature avoids confusion with other families or academic abstractions. The correct expansion of PIA is interconnect, not intermediate. Misnaming can cause misinterpretation when consulting pin-locking or timing models tied to the actual interconnect.



Step-by-Step Solution:

Identify MAX7000S major blocks: LAB + PIA.Expand PIA correctly: Programmable Interconnect Array.Compare with the statement (“intermediate”) → mismatch → incorrect.


Verification / Alternative check:

Check a MAX7000S datasheet overview; the routing network is consistently “interconnect.”


Why Other Options Are Wrong:

Correct: Would endorse the wrong term.Partially correct: Terminology is not vendor-variable here; it is specific.Applies only to MAX3000: Not relevant; still “interconnect.”


Common Pitfalls:

Mixing generic phrases with vendor-official block names.Assuming “PIA” can flexibly expand to similar-sounding words.


Final Answer:

Incorrect

More Questions from Programmable Logic Device

Discussion & Comments

No comments yet. Be the first to comment!
Join Discussion