Curioustab

Home » Electronics » Inductors

The output phase for a transformer is:

in phase with the input
out of phase with the input
dependent on the direction of the primary and secondary windings
dependent on the frequency of the primary source

Correct Answer: dependent on the direction of the primary and secondary windings

← Previous Question Next Question→

More Questions from Inductors

A practical inductor
Which transformer turns ratio is needed to match two 16-ohm parallel devices to an output of 22.2 ohms?
When current in an inductor starts to change, it cannot react instantly due to:
What is the phase angle of a 24 Vac parallel RL circuit when R = 45 ohms and XL = 1100 ohms?
On a schematic, dashed lines between two vertical coils usually mean the transformer has:
The polarity of induced voltage while a field is collapsing is:
What is the number of turns required in the secondary winding for a transformer when 120 volts is applied to a 2400-turn primary to produce 7.5 Vac at the secondary?
A loaded transformer will achieve mutual induction when:
When used as a filter, an inductor is
What term is used to describe the action of magnetic flux from one circuit that cuts across the conductors of another circuit?

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion