Curioustab

Home » Electronics » Analog and Digital Converters

In a binary-weighted digital-to-analog converter (DAC), the values of the input resistors are chosen to be proportional to the binary weights of the corresponding input bits.

True

Correct Answer: False

← Previous Question Next Question→

More Questions from Analog and Digital Converters

A sample-and-hold circuit samples an analog value and holds it long enough for the analog-to-digital conversion to occur.
The relative accuracy of a digital-to-analog converter (DAC) is determined by settling time.
One way to determine the resolution of a digital-to-analog converter (DAC) is to compare the ratio of one step voltage to the maximum output voltage.
The flash method of analog-to-digital conversion (ADC) uses comparators that compare reference voltages with the analog input voltage.
An 8-bit digital-to-analog converter (DAC) has a resolution of 0.125 V.
If we double the number of bits in our digital representation of a number from 4 to 8 bits, we double the relative accuracy of the conversion from digital to analog.
A digital-to-analog converter (DAC) is said to be nonmonotonic if the magnitude of the output voltage increases every time the input code increases.
A(n) ________ converts an analog input to a digital output.
The characteristic that a change of one binary step on the input of a digital-to-analog converter (DAC) should cause exactly one step change on the output is called ________.
________ analog-to-digital converters (ADCs) use no clock signal, because there is no timing or sequencing required.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion