Curioustab

Home » Electronics » Analog and Digital Converters

The flash method of analog-to-digital conversion (ADC) uses comparators that compare reference voltages with the analog input voltage.

True

Correct Answer: True

← Previous Question Next Question→

More Questions from Analog and Digital Converters

An 8-bit digital-to-analog converter (DAC) has a resolution of 0.125 V.
If we double the number of bits in our digital representation of a number from 4 to 8 bits, we double the relative accuracy of the conversion from digital to analog.
A digital-to-analog converter (DAC) is said to be nonmonotonic if the magnitude of the output voltage increases every time the input code increases.
A(n) ________ converts an analog input to a digital output.
The characteristic that a change of one binary step on the input of a digital-to-analog converter (DAC) should cause exactly one step change on the output is called ________.
________ analog-to-digital converters (ADCs) use no clock signal, because there is no timing or sequencing required.
The problems of the binary-weighted resistor digital-to-analog converter (DAC) can be overcome by using ___________.
A binary-weighted resistor used in a digital-to-analog converter (DAC) is only practical up to a resolution of ________.
Inaccurate analog-to-digital conversion may be due to ____________.
________ analog-to-digital converters (ADCs) have a fixed value of conversion time that is not dependent on the value of the analog input.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion