Curioustab

Home » Electronics and Communication Engineering » Power Electronics

In a single phase full wave regulator, the rms current in each thyristors is Ir The run load current is equal to

2Ir
2 Ir
Ir

Correct Answer: 2 Ir

← Previous Question Next Question→

More Questions from Power Electronics

A class A chopper has an input voltage of 200 V. Ton = 1.5 ms and Toff = 4.5 ms. The duty cycle, average output voltage and ripple factor respectively are
The symbol in figure is for
The commutation method in an inverter, is
The output wave of a cycloconverter consists of a number of segments derived from the input wave.
An SCR is triggered at 80° in the positive half cycle, only. The rms anode current is 25 A. If the firing angle is changed to 160°, the rms current is likely to be
Which chopper circuit operates in quadrants 1 and 4?
Assertion (A): A fully controlled bridge converter can operate in first and fourth quadrant. Reason (R): A semi converter is cheaper than a full converter.
In auxiliary commutated chopper, the peak value of thyristor current is
In a single phase full converter fed by a source having inductance, the number of thyristors conducting during overlap is
A load commutated chopper circuit has

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion