Curioustab

Home » Electronics and Communication Engineering » Networks Analysis and Synthesis

A sinusoidal voltage has peak to peak value of 100 V. The rms value is

50 V
70.7 V
35.35 V
141.41 V

Correct Answer: 35.35 V

Explanation:

Peak value = 50 V, rms value = = 35.35 V.

← Previous Question Next Question→

More Questions from Networks Analysis and Synthesis

A series RC circuit has R = 5 Ω and C = 10 μF. The current in the circuit is 5 sin 20000t. The applied voltage is
A 3 phase balanced supply feeds 3 phase unbalanced load. Power supplied to the load can be measured by using 2 wattmeter one wattmeter 3 wattmeter Which of the above statements is correct?
The driving-point impedance Z(s) of a network has a pole-zero locations as shown in the figure. If Z(0) = 3, then Z (s) is
The degree of the nodes 1, 2, 3, 4 is
In the circuit of figure the voltage across capacitor when switch is closed at t = ∞ is
C = (2) (energy)/V2
Z(c) for the network shown in the figure is The value of C and R are, respectively
A capacitor stores 0.15C at 5 V. Its capacitance is
The impedance of an RC series circuit is 12 Ω at f= 50 Hz. At f= 200 Hz, the impedance will be
In the series circuit shown in figure, for series resonance, the value of the coupling coefficient, K will be

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion