Curioustab

Home » Electronics and Communication Engineering » Digital Electronics

An AND gate has two inputs A and B and one inhibit input 3, Output is 1 if

A = 1, B = 1, S = 1
A = 1, B = 1, S = 0
A = 1, B = 0, S = 1
A = 1, B = 0, S = 0

Correct Answer: A = 1, B = 1, S = 0

Explanation:

All AND inputs must be 1 and inhibit 0 for output to be 1.

← Previous Question Next Question→

More Questions from Digital Electronics

The fixed count that should be used so that the output register will represent the input for a 6 bit dual slope A/D converter uses a reference of -6v and a 1 MHz clock. It uses a fixed count of 40 (101000).
The output of a half adder is
A JK flip flop has tpd= 12 ns. The largest modulus of a ripple counter using these flip flops and operating at 10 MHz is
Maxterm designation for A + B + C is
In the expression A + BC, the total number of minterms will be
A carry look ahead adder is frequently used for addition because
A decade counter skips
Minimum number of 2-input NAND gates required to implement the function F = (x + y) (Z + W) is
The basic storage element in a digital system is
A counter type A/D converter contains a 4 bit binary ladder and a counter driven by a 2 MHz clock. Then conversion time

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion