Curioustab

Home » Electrical Engineering » RL Circuits

To increase the current in a series RL circuit, the frequency

should be increased
should be decreased
should be constant
cannot be determined without values

Correct Answer: should be decreased

← Previous Question Next Question→

More Questions from RL Circuits

A 1.5 kΩ resistor and a coil with a 2.2 kΩ inductive reactance are in series across an 18 V ac source. The power factor is
If a load is purely inductive and the reactive power is 12 VAR, the apparent power is
Which of the following power factors results in less energy loss in an RL circuit?
A 140 Ω resistor is in parallel with an inductor having 60 Ω inductive reactance. Both components are across a 12 V ac source. The magnitude of the total impedance is
If the frequency is halved and the resistance is doubled, the impedance of a series RL circuit
The voltages in Problem 5 are measured at a certain frequency. To make the resistor voltage less than the inductor voltage, the frequency is
A 12 kΩ resistor is in series with a 90 mH coil across an 8 kHz ac source. Current flow in the circuit, expressed in polar form, is I = 0.3∠0° mA. The source voltage, expressed in polar form, is
Referring to Problem 18, the circuit impedance is
When the frequency of the voltage applied to a series RL circuit is decreased, the impedance
A 47 Ω resistor is in series with an inductive reactance of 120 Ω across an ac source. The impedance, expressed in polar form, is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion