Curioustab

Home » Electrical Engineering » RL Circuits

If a load is purely inductive and the reactive power is 12 VAR, the apparent power is

0 VA
12 VA
6 VA
24 VA

Correct Answer: 12 VA

← Previous Question Next Question→

More Questions from RL Circuits

Which of the following power factors results in less energy loss in an RL circuit?
A 140 Ω resistor is in parallel with an inductor having 60 Ω inductive reactance. Both components are across a 12 V ac source. The magnitude of the total impedance is
If the frequency is halved and the resistance is doubled, the impedance of a series RL circuit
The voltages in Problem 5 are measured at a certain frequency. To make the resistor voltage less than the inductor voltage, the frequency is
A 12 kΩ resistor is in series with a 90 mH coil across an 8 kHz ac source. Current flow in the circuit, expressed in polar form, is I = 0.3∠0° mA. The source voltage, expressed in polar form, is
Referring to Problem 18, the circuit impedance is
When the frequency of the voltage applied to a series RL circuit is decreased, the impedance
A 47 Ω resistor is in series with an inductive reactance of 120 Ω across an ac source. The impedance, expressed in polar form, is
A 3.3 kΩ resistor and a 120 mH coil are in parallel. Both components are across a 2 kHz, 12 V ac source. The total current in the circuit is
A 1.2 kΩ resistor is in series with a 15 mH coil across a 10 kHz ac source. The magnitude of the total impedance is

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion