Curioustab

Home » Electrical Engineering » RL Circuits

A 1.2 kΩ resistor is in series with a 15 mH coil across a 10 kHz ac source. The magnitude of the total impedance is

152.6 Ω
1,526 Ω
1,200 Ω
942 Ω

Correct Answer: 1,526 Ω

← Previous Question Next Question→

More Questions from RL Circuits

When the frequency of the voltage applied to a series RL circuit is increased, the phase angle
A 470 Ω resistor and a 200 mH coil are in parallel. Both components are across a 1.5 kHz ac source. The total admittance of the circuit, in polar form, is
A 470 Ω resistor and a coil with 125 Ω inductive reactance are in parallel. Both components are across a 15 V ac voltage source. Current through the inductor is
In a series RL circuit, 12 V rms is measured across the resistor, and 14 V rms is measured across the inductor. The peak value of the source voltage is
When the resistor voltage in a series RL circuit becomes less than the inductor voltage, the phase angle
The phase angle (θ) of a series RL circuit varies directly with frequency.
A power factor of 1 indicates a purely reactive circuit, and a power factor of 0 indicates a purely resistive circuit.
Total current in an RL circuit always lags the source voltage.
In a lag network, the output voltage lags the input voltage in phase.
The resistor voltage in an RL circuit is always out of phase with the current.

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion