logo

CuriousTab

CuriousTab

Discussion


Home Digital Electronics Counters Comments

  • Question
  • The circuit shown below is a ________.

    The circuit shown below is a ________. Johnson counter ring counter decade counter BCD counter


  • Options
  • A. Johnson counter
  • B. ring counter
  • C. decade counter
  • D. BCD counter

  • Correct Answer
  • Johnson counter 


  • Counters problems


    Search Results


    • 1. In VHDL, if we need to remember a value it must be stored in a ________.

    • Options
    • A. function
    • B. type declaration
    • C. variable
    • D. process
    • Discuss
    • 2. The counter circuit and associated waveforms shown below are for a(n) ________ counter, and the correct output waveform for QB is shown by waveform ________.


    • Options
    • A. synchronous, a
    • B. asynchronous, b
    • C. synchronous, c
    • D. asynchronous, d
    • Discuss
    • 3. A D flip-flop can be made to toggle by ________.

    • Options
    • A. connecting to Q to D
    • B. connecting to Q to D
    • C. connecting D low
    • D. connecting D high
    • Discuss
    • 4. Referring to the function table given below, taking the CLEAR, S1, and S0 inputs all HIGH ________.


    • Options
    • A. will inhibit the operation of the register
    • B. will reset the parallel registers and inhibit the serial data inputs
    • C. will cause the parallel data inputs to be loaded and passed to the parallel data outputs
    • D. will depend on what values are loaded into the parallel data inputs
    • Discuss
    • 5. The minimum number of flip-flops that can be used to construct a modulus-5 counter is ________.

    • Options
    • A. 3
    • B. 5
    • C. 8
    • D. 10
    • Discuss
    • 6. Modulus refers to ________.

    • Options
    • A. a method used to fabricate decade counter units
    • B. the modulus of elasticity, or the ability of a circuit to be stretched from one mode to another
    • C. an input on a counter that is used to set the counter state, such as UP/DOWN
    • D. the maximum number of states in a counter sequence
    • Discuss
    • 7. The decimal equivalent of the largest number that can be stored in a 4-bit binary counter is ________.

    • Options
    • A. 8
    • B. 15
    • C. 16
    • D. 32
    • Discuss
    • 8. A J-K flip-flop is reset and must stay reset after the clock pulse. This transition requires that ________.

    • Options
    • A. J and K inputs must both = 0
    • B. J must be 0, K doesn't matter
    • C. J doesn't matter, K must = 0
    • D. J must be 0 and K must be 1
    • Discuss
    • 9. A BCD counter has ________ states.

    • Options
    • A. 8
    • B. 9
    • C. 10
    • D. 11
    • Discuss
    • 10. The duty cycle of the most significant bit from a 4-bit (0?9) BCD counter is ________.

    • Options
    • A. 10%
    • B. 20%
    • C. 50%
    • D. 80%
    • Discuss


    Comments

    There are no comments.

Enter a new Comment