Discussion
Home ‣ Electronics ‣ Sequential Logic Circuits Comments
- Question
A _________ shift register can shift stored data either left or right.
Options- A. bidirectional
- B. tri-state
- C. universal
- D. bidirectional universal
- Correct Answer
- bidirectional universal
- 1. Asynchronous counters are often called ________ counters.
Options- A. toggle
- B. ripple
- C. binary
- D. flip-flop Discuss
- 2. An asynchronous counter differs from a synchronous counter in the method of clocking.
Options- A. True
- B. False Discuss
- 3. A ripple counter is an asynchronous counter.
Options- A. True
- B. False Discuss
- 4. The modulus (mod) of a counter is the same as its maximum count (N).
Options- A. True
- B. False Discuss
- 5. A parallel-in, serial-out shift register enters all data bits simultaneously and transfers them out one bit at a time.
Options- A. True
- B. False Discuss
- 6. To operate correctly, starting a ring counter requires __________.
Options- A. clearing one flip-flop and presetting all the others
- B. clearing all the flip-flops
- C. presetting one flip-flop and clearing all the others
- D. presetting all the flip-flops Discuss
- 7. In order to use a shift register as a counter, ________.
Options- A. the register's serial input is the counter input and the serial output is the counter output
- B. the parallel inputs provide the input signal and the output signal is taken from the serial data output
- C. a serial-in, serial-out register must be used
- D. the serial output of the register is connected back to the serial input of the register Discuss
- 8. Synchronous construction reduces the delay time of a counter to the delay of __________.
Options- A. all flip-flops and gates
- B. a single flip-flop and a gate
- C. all flip-flops and gates after a 3 count
- D. a single gate Discuss
- 9. Ring and johnson counters are _______.
Options- A. asynchronous counters
- B. synchronous counters
- C. true binary counters
- D. asynchronous and true binary counters Discuss
- 10. A sequence of equally spaced timing pulses may be easily generated by a(n) __________.
Options- A. ring counter
- B. johnson counter
- C. binary up counter
- D. ripple counter Discuss
Sequential Logic Circuits problems
Search Results
Correct Answer: ripple
Correct Answer: True
Correct Answer: True
Correct Answer: True
Correct Answer: True
Correct Answer: presetting one flip-flop and clearing all the others
Correct Answer: the serial output of the register is connected back to the serial input of the register
Correct Answer: a single flip-flop and a gate
Correct Answer: synchronous counters
Correct Answer: ring counter
Comments
There are no comments.More in Electronics:
Programming
Copyright ©CuriousTab. All rights reserved.