Discussion
Home ‣ Civil Engineering ‣ GATE Exam Questions Comments
- Question
The deflection of a cantilever beam at free end b applied with a moment M at the same point is :
Options- A. M l2/EI
- B. M l2/2 EI
- C. M l2/3 EI
- D. M l2/4 EI
- Correct Answer
- M l2/2 EI
- 1. Blue baby disease (methaemoglobinemia) in children is caused by the presence of excess
Options- A. Chorides
- B. Nitrates
- C. Fluoride
- D. Lead Discuss
- 2. One of the following statements is true with regards to bodies that float or are submerged in liquids :
Options- A. For a body wholly submerged in a liquid the stability is ensured if the centre of buoyancy is below the centre of gravity of the body
- B. For a body floating in a liquid the stability is ensured if the centre of buoyancy is below the centre of gravity of the body
- C. For a body floating in a liquid the stability is ensured if the centre of buoyancy and the centre of gravity, regardless of the relative positions of the centre of buoyancy and gravity
- D. For a body floating in a liquid the stability is ensured if the centre of buoyancy is below the centre of gravity and the metacentre is above both the centres of gravity and buoyancy. Discuss
- 3. Mechanical stabilization requires :
Options- A. mixing of two or more types of natural soils
- B. addition of chemicals to soils
- C. addition of lime to soils
- D. addition of cementing material to soils Discuss
- 4. In the plate bearing test, if the load applied is in the form of an inflated type of wheel, then this mechanism corresponds to :
Options- A. rigid plate
- B. flexible plate
- C. semi-rigid plate
- D. semi-elastic plate Discuss
- 5. The downstream end of a long prismatic channel of mild slope, ends in a pool created by a dam. The resulting non-uniform water surface profile can be described as one of the following :
Options- A. M3 profile ending in a hydraulic jump
- B. M1 profile that lies above normal depth line
- C. M2 profile that lies between critical and normal depth lines
- D. M3 profile that lies between critical and normal depth lines Discuss
- 6. The ultimate bearing capacity of a soil is 300 kN/m2. The depth of foundation is 1 m and unit weight of soil is 20 kN/m3. Choosing a factor of safety of 2.5, the net safe bearing cacpacity is
Options- A. 100 kN/m2
- B. 112 kN/m2
- C. 800 kN/m2
- D. 100.5 kN/m2 Discuss
- 7. The return period for the annual maximum flood of a given magnitude is 8 years. The probability that this flood magnitude will be exceeded once during the next 5 years is
Options- A. 0.625
- B. 0.966
- C. 0.487
- D. 0.529 Discuss
- 8. Transition curves are provided on the approach to horizontal curves in order to :
Options- A. increase jerk to allowable levels
- B. minimize the length of the horizontal curve
- C. simplify the laying-out and construction of the horizontal curve
- D. reduce jerk to allowable levels Discuss
- 9. As per IS : 800-1984 the maximum allowable slenderness ratio of compression members carrying forces resulting from dead load and superimposed load is
Options- A. 180
- B. 250
- C. 300
- D. 400 Discuss
- 10. A person standing on the bank of a canal drops a stone on the water surface. He notices that the disturbance on the water surface in not travelling upstream. This is because the flow in the canal is
Options- A. sub-critical
- B. super-critical
- C. steady
- D. uniform Discuss
GATE Exam Questions problems
Search Results
Correct Answer: Nitrates
Correct Answer: For a body floating in a liquid the stability is ensured if the centre of buoyancy is below the centre of gravity and the metacentre is above both the centres of gravity and buoyancy.
Correct Answer: mixing of two or more types of natural soils
Correct Answer: semi-rigid plate
Correct Answer: M3 profile that lies between critical and normal depth lines
Correct Answer: 100.5 kN/m2
Correct Answer: 0.487
Correct Answer: reduce jerk to allowable levels
Correct Answer: 180
Correct Answer: super-critical
Comments
There are no comments.More in Civil Engineering:
Programming
Copyright ©CuriousTab. All rights reserved.