Curioustab

Home » Civil Engineering » GATE Exam Questions

Transition curves are provided on the approach to horizontal curves in order to :

increase jerk to allowable levels
minimize the length of the horizontal curve
simplify the laying-out and construction of the horizontal curve
reduce jerk to allowable levels

Correct Answer: reduce jerk to allowable levels

← Previous Question Next Question→

More Questions from GATE Exam Questions

As per IS : 800-1984 the maximum allowable slenderness ratio of compression members carrying forces resulting from dead load and superimposed load is
A person standing on the bank of a canal drops a stone on the water surface. He notices that the disturbance on the water surface in not travelling upstream. This is because the flow in the canal is
Water flows at a rate of 10 m3/s in a rectangular channel 3 m wide. The critical depth of flow is
A borrow pit soil has a dry density of 17 kN/m3. How many cubic meters of this soil will be required to construct an embankment of 100 m3 volume with a dry density of 16 kN/m3.
The function of ballast in railaway tracks is to
A soil formation through which only seepage is possible, being partly permeable and capable of giving insignificant yield, is classified as
Horizontal stiffness coefficient, K11 of bar ab is given by :
The flow of water (mass density = 1000 kg/m3 and kinematic viscosity = 10-6 m2/s) in a commercial pipe, having equivalent roughness ks as 0.12 mm, yields an average shear stress at the pipe boundary = 600 N/m2. The value of ks/δ' (δ' being the thickness of laminar sub-layer) for this pipe is
Coagulation-flocculation with alum is performed :
Pipingin soil occurs when

Discussion & Comments

No comments yet. Be the first to comment!

Join Discussion