In a member subjected to an axial tensile force and bending moment, the maximum

CuriousTab

CuriousTab

Home Aptitude

Discussion

Home ‣ Civil Engineering ‣ Steel Structure Design See What Others Are Saying!

Question
In a member subjected to an axial tensile force and bending moment, the maximum allowable stress in axial tension is f_t and the maximum allowable bending stress in tension is f_ht. If f_t and f_ht are their corresponding actual axial tensile and bending stresses, the relationship which holds goods is
Options
A.
B.
C.
D.

Correct Answer

More questions

2. A cantilever beam of length L and a cross section with shape factor f supports a concentrated load P as shown below

The length L_P of the plastic zone, when the maximum bending moment equals the plastic moment M_P, given by
Options
A.
B.
C.
D.

6. Pick up the correct statement from the following:
Options
A. Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38%
B. The bulking of fine sand is more than that of coarse sand
C. If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing
D. The volume of fully saturated sand equals that of dry sand
E. All the above.

Comments

More in Civil Engineering: