logo

CuriousTab

CuriousTab

Discussion

Home ‣ Civil Engineering ‣ Soil Mechanics and Foundation Engineering Comments
  • Question

  • The property of a soil which permits water to percolate through it, is called


  • Options
  • A. moisture content
  • B. permeability
  • C. capillarity
  • D. none of these.

  • Correct Answer
  • permeability 

    • Soil Mechanics and Foundation Engineering problems

    Search Results

    • 1. The shearing strength of a cohesion-less soil depends upon

    • Options
    • A. dry density
    • B. rate of loading
    • C. confining pressure
    • D. nature of loading.
      • Discuss
    • 2. The ratio of the undrained strength in the undrained state to the undrained strength, at the same water content, in the remoulded state, is called the sensivity of the clay. Its value for quick clays is

    • Options
    • A. 4
    • B. 8
    • C. 12
    • D. 16
    • E. 20
      • Discuss
    • 3. The expression ?? is used for

    • Options
    • A. dry density
    • B. bulk density
    • C. degree of saturation
    • D. optimum water content.
      • Discuss
    • 4. The method of the slices is applicable to

    • Options
    • A. homogenous soils
    • B. stratified soils
    • C. saturated soils
    • D. non-uniform slopes
    • E. all the above.
      • Discuss
    • 5. The total active earth pressure due to dry back fill with no surcharge, acts at H/3 above the base of the wall and is directly proportional to

    • Options
    • A. H
    • B.
    • C. H2
    • D. H3.
      • Discuss
    • 6. A soil sample of mass specific gravity 1.92, has a moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is

    • Options
    • A. 95.4%
    • B. 95.5%
    • C. 95.6%
    • D. 95.7%
      • Discuss
    • 7. The zero atmospheric pressure is at

    • Options
    • A. sea level
    • B. mean sea level
    • C. water table
    • D. phreatic surface
    • E. both (c) and (d) of the above.
      • Discuss
    • 8. Cohesive soils are generally

    • Options
    • A. plastic and also compressible
    • B. elastic and also compressible
    • C. plastic but incompressible
    • D. none of these.
      • Discuss
    • 9. For testing a saturated clay for shear strength, the test recommended, is

    • Options
    • A. direct shear test
    • B. triaxial compression test
    • C. unconfined compression test
    • D. all the above.
      • Discuss
    • 10. The weight of a container is W1 and that of container with soil simple, is W2. If the weight of the container and oven dried soil sample is W3, the moisture content of the soil, is

    • Options
    • A.
    • B.
    • C.
    • D.
      • Discuss

    Comments

    There are no comments.
Enter a new Comment




Aptitude

Engineering

Programming

Reasoning

Links

Copyright ©CuriousTab. All rights reserved.